What Are Some Common Workplace Electrical Hazards?

Electrical Hazards

Of all the energy sources used in the workplace, electricity has the most significant potential to injure seriously or cause fatalities. The human body is an excellent conductor of electricity, and even non-fatal electric shocks can cause severe and permanent injury.
Electrical injuries include burns, electrocution and shock. Electric shock can cause muscle spasms, breathing failure, irregular heartbeat, severe burns, unconsciousness and can be fatal.
Electric shock can arise from exposed contacts, live electrical equipment, damaged insulation and wet conditions. An electrical fire can occur from loose connections, heating equipment, short circuits and the incorrect electrical equipment in hazardous environments.
The main electrical hazards in the workplace are:
  • Contact with live parts of tools, equipment, extension cables and machinery.
  • Electrical faults causing fires.
  • Fires or explosions where electricity is the source of ignition.

Safe Work Practices

Safe work practices include ensuring that you follow these electrical safety requirements:

  • Make sure that you know where the switch is for each fixed machine so you can cut off the power in an emergency.
  • When using portable electric tools or equipment, make sure that you use socket outlets close by so that equipment can easily be disconnected in an emergency.
  • Switch off and unplug tools, machinery and equipment before cleaning, making adjustments, servicing or changing attachments. Also, unplug tools when not in use.
  • If there is an electrical problem, always try and disconnect the power by turning the main power switch off first.
  • Make sure that all electric cords are in good condition and have been tested and tagged before using them. Check for any damage or exposed wires, fraying or cracked leads, and cracked or broken power sockets or plug tops. Replace any damaged leads correctly, or have them replaced by an electrician.
  • To avoid electric shock, keep all electrical cords and electric power tools, equipment and machinery dry and clear of water or damp areas. Avoid using power tools in damp or wet locations. Preferably use cordless tools for damp or wet locations.
  • Use residual current devices (RCD) when using electric power tools and when working outside with electrical equipment. When using mains power, use an isolating transformer.
  • Keep all electrical power cords well clear of the working area.
  • Always have dry hands when touching electrical appliances or sockets.
  • Never operate electric power tools near flammable liquids or gases, or in an explosive atmosphere.
  • Ensure that the air vents in electric power tools are kept free of dust, oil, wood and plastic or metal scraps so that the motor is well ventilated and will not overheat
  • If you come across suspect or faulty equipment, do not use it and report to your supervisor.

Comments

Post a Comment

Popular posts from this blog

All About Dry Powder Fire Extinguishers

Dry Powder Fire Extinguishers Dry Powder Fire Extinguishers are the most common fire extinguishers in New Zealand. Often referred to as Dry Powder, Dry Chemical or ABE Fire Extinguishers, they contain a dry chemical powder as the extinguishing agent. How to Identify A Dry Powder Fire Extinguisher Dry Powder Fire Extinguishers are a red cylinder with a white band running all around the top. Older, outdated models were an entire white cylinder. You can often see the words Dry Chemical printed on the front. Where To Use A Dry Powder Fire Extinguisher Due to their versatility, dry chemical fire extinguishers can be used in many different settings. They are suited for around the home, in the office, large factories and many other types of businesses. There are two kinds of dry chemical fire extinguishers on the market. ABE Fire Extinguishers As the name suggests, ABE fire extinguishers can be used to fight fires of class A, B, and E. This covers a wide range of hazards, including...
Read more

What Are The Different Classes Of Fire?

Image
Classes Of Fire The fuel burning dictates the type of extinguisher you use to fight the fire. To help you understand this concept you need to know how fires are classified and which fire extinguishers are suitable for each class. Class A Fires Class A fires start when materials such as paper, rubbish, wood, or other carbon-based materials ignite. Dry powder, foam and water extinguishers are suitable for this class of fire. Your best plan of attack would is to locate the nearest fire hose. This will give you a constant stream of water. The temperature at the base of the fire will cool to a point below that needed for combustion to take place. Class B Fires Class B fires involve flammable liquids such as paints, oil, and petrol. With these materials, its the vapours of fumes that burn rather than the liquid. Because the vapours a lighter than air, they can drift away from the seat of the fire, and then ignite, causing what’s called a flash-off. This class of fire...
Read more

NZ Fire Extinguisher Types And Fire Class

Image
Fire is a constant danger when you're using flammable materials in any workshop. Your safety depends on whether you can Identify the cause of the fire. Identify the correct extinguisher to use on different fires. Correctly operate the fire extinguisher. Elements of fire Fuel, heat and oxygen must be present before there can be a fire: Fuel is anything combustible: any solid, liquid or gas that can burn, for example, wood, paper, oil, solvents and so on. Heat can come from flames, sparks, friction, electrical sources, hot pipes and equipment. Oxygen comes mainly from the air but also from some chemicals. To put out a fire, remove one of the three elements by: Removing fuel to starve the fire. Removing oxygen to smother the fire. Cooling the heat by using water. Types of fire The fuel that is burning dictates the kind of extinguisher you use to fight the fire. To help you understand this concept, you need to know how fires are classified and which fire ...
Read more